When a quick and/or temporary solution to a stair nosing application is required, a flexible pvc profile is the answer. Easily cut and trimmed on site they can be fitted without waiting for a fully cut and drilled bespoke stair nosing. They can also be curved around gentle radii without templating. Flexible stair nosing's are good value products, but do not have the life span of more sturdy options. They are perfect for very light traffic or short term applications.

When a quick and/or temporary solution to a stair nosing application is required, a flexible pvc profile is the answer. Easily cut and trimmed on site they can be fitted without waiting for a fully cut and drilled bespoke stair nosing. They can also be curved around gentle radii without templating. Flexible stair nosing's are good value products, but do not have the life span of more sturdy options. They are perfect for very light traffic or short term applications.

The FXB336 PVC-u base is pre-punched for forming curves on-site without the need for heat application, reducing the requirement for pre-fabricated curves.

FXR40/FXB336 provides a safe transition between resilient flooring and carpet/carpet tile of 6mm height (compressed thickness). When using Clip-Top fx with carpet, the compressed thickness of the carpet should always be a tight fit to the internal gauge of the combined top/base profile.

For straight lengths, FXR40 should be used with AFT336 aluminium base.

Adhesive tape for floor coverings

• For strengthening edge and seam adhesion of sigaway installations

Uzin Sigan 1 is an double sided tape flooring adhesive.

Uzin Sigan 2 is an double sided tape flooring adhesive.

Uzin Sigan 3 is an double sided tape flooring adhesive. Fast adhesion of new coverings onto existing wood flooring / laminate

Flexible polyurethane adhesive for heavy-duty floor coverings

• very high dimensional stability even with special covering materials
• highest bond-strength, therefore extremely reliable
• for (almost) any loading, therefore universal applications

Conductive fibre-adhesive for textile and linoleum coverings

• rapid grab properties, efficient installation, saves time
• snap-off 28 cm / 21 cm trowel blade supplied, option for large or small areas

• for use with all common textile, lino and PVC coverings, therefore economical in use

Dispersion adhesive for PVC/CV floor coverings, lino and all common textile floor coverings in interior locations.

• wet adhesive with high initial grab and strong thread-formation allowing fast work progress
• short open time, time-saving

Universal adhesive for all resilient and textile floor coverings

• for almost all textile coverings, therefore truly universal
• strong thread-formation, giving reliable adhesion
• best possible environmental compatibility due to its EC 1 classification

Dispersion adhesive with strong thread formation, excellent grab and high final strength

• for almost all textile coverings
• strong thread-formation, giving reliable adhesion

Dispersion adhesive for PVC/CV floor coverings, lino and all common textile floor coverings in interior locations. wet adhesive with high initial grab and strong thread-formation allowing fast work progress short open time, time-saving

A two part adhesive specifically designed to secure a range of sheet floor coverings to the Stopgap Isolator Membrane. Suitable for use in areas that are subject to high levels of moisture. When cured it is resistant to water, oil and grease.

A cutting edge Stair Nosing solution for all types of commercial buildings, the range offers a number of innovative features including a unique edge to edge tread which provides a slip resistant surface for the entire width of the tread. The satin etched riser or uPVC Stair Nosing helps to also meet Building Regulation guidelines.

Please advise cut lengths required, Please Advise if pre drilling is required.

A cutting edge Stair Nosing solution for all types of commercial buildings, the range offers a number of innovative features including a unique edge to edge tread which provides a slip resistant surface for the entire width of the tread. The satin etched riser or uPVC Stair Nosing helps to also meet Building Regulation guidelines.

Please advice cut lengths required, Please Advise if pre drilling is required

A cutting edge Stair Nosing solution for all types of commercial buildings, the range offers a number of innovative features including a unique edge to edge tread which provides a slip resistant surface for the entire width of the tread. The satin etched riser or uPVC Stair Nosing helps to also meet Building Regulation guidelines.

Please advice cut lengths required, Please Advise if pre drilling is required

A cutting edge Stair Nosing solution for all types of commercial buildings, the range offers a number of innovative features including a unique edge to edge tread which provides a slip resistant surface for the entire width of the tread. The satin etched riser or uPVC Stair Nosing helps to also meet Building Regulation guidelines.

Please advice cut lengths required, Please Advice if pre drilling is required

Tremco SX300 (formerly Treadfast Unitex NA) is a two part general purpose smoothing underlayment for interior applications.

Get Stuck In adhesive is a multi purpose contact adhesive supplied in a 500ml aerosol can.

Clean - Every application is a fresh clean application. No product is wasted. The enclosed system prevents the product drying out, skinning over or becoming contaminated.

Non flammable adhesive - The only flammable component is the propellant. Once that has evaporated, a totally non flammable bond is achieved.

Health and safety - Easily disposable - contains low odour and no CFC's.

Storage - Can be stored for 12months when kept in the original unopened container.

Get Stuck In adhesive is a multi purpose contact adhesive supplied in a 17kg pressurised Container. Simply Connect a 4 metre hose and spray gun to provide a portable, easy to use and time saving spray-able Adhesive system.


Portable - no need for a compressor or other expensive equipment.

Clean - Every application is a fresh clean application. No product is wasted. The enclosed system prevents the product drying out, skinning over or becoming contaminated.

Non flammable adhesive - The only flammable component is the propellant. Once that has evaporated, a totally non flammable bond is achieved.

Health and safety - Easily disposable - contains low odour and no CFC's.

Storage - Can be stored for 12months when kept in the original unopened container.