|
|
|
|
|
|
|
|
|
|
|
|
|
Capping strip gives a neat finish to the installation and ensures a continuous, sealed surface. (BLACK)
Comes as a 2m length strip 35mm available in full strip only.
|
CF32P cove former provides a neat cove allowing floorcoverings to be dressed up the wall to form a skirting, whilst supporting the floorcoverings at the weakest point. Cove formers are usually used in conjunction with a capping seal or carpet cap to finish the raw edge of the floorcovering.
|
Where ease of maintenance and hygiene are important, sheet flooring may be taken up the wall having created a radius using our Cove Former.
Comes as a 2m length strip 35mm high 35mm wide available in full strip only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sit-on coving is fitted after the flooring has been laid and can therefore be used to replace an old skirting, as well as to provide a neat finish to a new floor.
These tough and durable covings give protection to the wall decorations at floor level. Ejecta skirting is easy to clean, needs no painting and offers long-term maintenance savings compared to timber skirting.
MC8 comes in 2m lengths in a choice of 15 colours
|
Sit-on coving is fitted after the flooring has been laid and can therefore be used to replace an old skirting, as well as to provide a neat finish to a new floor.
These tough and durable covings give protection to the wall decorations at floor level. Ejecta skirting is easy to clean, needs no painting and offers long-term maintenance savings compared to timber skirting.
MC14 comes in 2m lengths in a choice of 15 colours
|
Where ease of maintenance and hygiene are important, sheet flooring may be taken up the wall, having created a radius using our Cove Former. Capping Strip gives a neat finish to the installation and ensures a continuous, sealed surface. The benefits of a sealed, easily maintained surface are invaluable in hospitals and other similar locations where hygiene is of paramount importance.
Easy-to-fit flooring accessories designed for use with most vinyl floorcoverings
Sit-on and set-in coved skirtings for attractive and hygienic finishing
Welding rod to match Polyflor sheet products to produce hygienic, continuous floors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Capping Strip givesa neat finish to the installation and ensures a continuous, sealed surface.
The benefits of a sealed, easily maintained surface are invaluable in hospitals and other similar locations where hygience is of paramount importance.
CS- N Size 40mm, 2 metres length.
|
Polyflor CSN Capping strip gives a neat finish to the installation and ensures a continuous, sealed surface. The benefits of a sealed, easily maintained surface
are invaluable in hospitals and other similar locations where hygiene is of paramount importance.
Available in 2 metre lengths.
And 15 colours.
|
Quantum UCS2 Universal Capping Strip
These products are used in conjunction with each other to allow the floor covering to be continued up the wall. The cove former is installed at the join between the wall and the floor to create a constant curve to run the floor covering up as well as a hidden support for the floor covering at a weak point. A capping strip is then installed where the floor covering ends to create a neat finish to the floor covering. The cove formers are available in flexible PVC to allow for easy curving on site, whilst the capping strips are available in both flexible PVC and rigid PVC in a number of colours to suit most flooring colours.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* Easy-to-fit flooring accessories designed for use with most vinyl floorcoverings
* Sit-on and set-in coved skirtings for attractive and hygienic finishing
* Welding rod to match Polyflor sheet products to produce hygienic, continuous floors
|
GRIPFILL
*Bonds almost any surface
*Excellent strength including vertical applications
*Suitable for interior and exterior use (provided bond is covered)
Bonds:
Wood, plywood, hardboard, chipboard, laminated plastic, brick, rigid insulation material (except polystyrene), metal, stone breeze block, ceramics, concrete, sand/cement screeds, plasterborad, cement composite boards, G.R.P
Comes in 350ml Cartridge. Coverage 12 metres of 6mm bead per 350ml cartridge
|
Quantum EC5 installed on top of the floor covering, this range of products offers another option when addressing the join between the wall and the floor. Available in a number of different sizes and colours, the range offers a solution to most flooring areas. Generally sit on skirtings are used with hard floor coverings. Typical applications areas include schools, colleges and public buildings.
Accessory or Trim Sit-on Skirting
Fitting Type Standard
Height (mm) 100
Width (mm) 19
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Where ease of maintenance and hygiene are important, sheet flooring may be taken up the wall having created a radius using our Cove Former.
Comes as a 2m length strip 20mm high. Available in full strip only.
|
Gradus Capping Strip 2m Length
|
Capping strip gives a neat finish to the installation and ensures a continuous, sealed surface. (WHITE)
Comes as a 2m length strip 35mm available in full strip only.
If a colour is required please contact as there is a minimum quantity order of 50 lengths. Colours are grey and white.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Skirting of this type is fitted before the flooring is laid, where a simple butt joint is required. Welded to the flooring, this provides a secure joint.
Size 100 x 50mm, Length 2m, Colour - 15 to choose from.
|
Polyflor CT Capping Strip Comes in a 2metre length.
There is a £3 fee if ordering a quantity less than 50.
Only comes in colour white.
|
Quantum CCF1 is a combined Cap and Coving profile that can reduce installation time aswell as providing a neat solution to the wall and floor join.
*Cove formers support the floor covering when running it up the wall
*The gentle curve that is formed helps prevent the accumulation of dirt
*Capping strips create a neat finish to the trimmed edge of the floor covering where it meets the wall
*The flexible PVC can be curved on site
*A number of different colours are available to compliment or contrast with the floor covering
*A combined Cap and Cove former reduces installation time
Height (mm) 100
Width (mm) 32
Gauge Combined Cap & Cover Former
Length 2metre strip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quantum EC14 Set In Skirting
Available in 13 colours.
Price per 2m length
|
SI100502.5 is a flexible pvc, 100 mm high, set-in skirting, ideal for use with resilient floor coverings in critical clean areas where a homogeneous finish is required e.g. hospital treatment areas. Provides an impervious seal when welded to the floor covering. Suitable for hot and cold welding.
|
Quantum Capping Strip of Ceramic tiles uPVC QCT1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These products are used in conjunction with each other to allow the floor covering to be continued up the wall. The cove former is installed at the join between the wall and the floor to create a constant curve to run the floor covering up as well as a hidden support for the floor covering at a weak point.
2m Strip
|
EFA75 Corner Cap
To enable the wall-cladding to be formedaround external corners, it will be necessary to fitand adhere ‘Polyflor Ejecta EFA75’ cornercap profile to all external corners.
|
Capping strip gives a neat finish to the installation and ensures a continuous, sealed surface. The benefits of a sealed, easily maintained surface are invaluable in hospitals and other similar locations where hygiene is of paramount importance.
CS 20 metre length coil.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sit-on coving is fitted after the flooring has been laid and can therefore be used to replace an old skirting, as well as to provide a neat finish to a new floor.
These tough and durable covings give protection to the wall decorations at floor level. Ejecta skirting is easy to clean, needs no painting and offers long-term maintenance savings compared to timber skirting.
|
Quantum UCS2c Universal Capping Strip
These products are used in conjunction with each other to allow the floor covering to be continued up the wall. The cove former is installed at the join between the wall and the floor to create a constant curve to run the floor covering up as well as a hidden support for the floor covering at a weak point. A capping strip is then installed where the floor covering ends to create a neat finish to the floor covering. The cove formers are available in flexible PVC to allow for easy curving on site, whilst the capping strips are available in both flexible PVC and rigid PVC in a number of colours to suit most flooring colours.
|
Quantum EC5 Coiled Sit On Skirting. coiled to reduce the need for joins on the wall, this product offers another option when addressing the join between the wall and the floor. Typical applications areas include schools, colleges and public buildings.
Comes in a 32 metre roll - trim on-site meaning there is no need for multiple joins.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Capping is used in conjunction with Cove Former to allow the floor covering to be continued up the wall. The capping strip sits on the top of the vinyl to create an edge running along the wall. Comes in a 25lm Coil.
|
HCS48 is a flexible pvc capping seal for use with 3mm-5mm resilient floorcoverings. HCS48 is used to finish the top of a resilient floorcovering where it has been coved up the wall and is usually used in conjunction with a cove former
|
HCS50 is a flexible pvc capping seal for use with 3mm-5mm resilient floorcoverings. It is used to finish the top of a resilient floorcovering where it has been coved up the wall and is usually used in conjunction with a cove former. Supplied in 20 metre coils to reduce the quantity of vertical joints on an installation.
|
|
|
