|
|
|
|
|
|
|
|
|
|
|
|
|
|
StyccoBond F3 is a water based rubber/resin flooring adhesive that has excellent wet grab with an early build up of strength. It is protected against bio-degradation and is suitable for use over normal underfloor heating installations.
1 Litre tub as a coverage of 3 SQM
|
Absorbent and non-absorbent subfloors.
A fast setting, low odour, protein free floor smoothing underlayment. The cured product has a high strength making it suitable in areas subject to both light and heavy-duty traffic. The protein free composition makes it suitable for use in clinical and biologically sensitive areas. By thickening the mix it can be used to repair stairs and for ramping between floor levels.
Stopgap Green Bag Powder is suitable for patch filling wooden floors prior to overpinning.
|
A solvent free acrylic emulsion adhesive which is designed to give a high bond strength, strong initial tack and a long open time. It is protected against biodegradation and is suitable for use over normal underfloor heating installations.
Also available in 5 & 15 litre Tubs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fball Stopgap Graded Aggregate 3mm
|
STYCCO FLEX is a rapid curing flexible adhesive with excellent gap filling properties that is suitable for bonding a wide range of construction and building materials to most surfaces in both internal and external environments. STYCCO FLEX is suitable for fixing stair nosings without the need for mechanical fixing to suitably sound substrates. It is also suitable for bonding carpet gripper, PVC cladding, skirting boards, architrave and trims. It can also be used to secure header rows when installing wood flooring.
|
Stopgap 128 - Liquid latex for mixing with
self leveling powder (Ball Green Bag).
- Eliminates primer usage
- Designed to be used for most absorbent surfaces
Size: 5 litre bottle
(one bottle for one 25kg bag)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A water mix, base compound designed for use where floor levels need to be raised quickly and economically. Suitable for pump application. Stopgap 600 is self-smoothing, dimensionally stable and fast drying, it should be capped with Stopgap 100, Stopgap 200, Stopgap 300 or Stopgap 800 smoothing underlayments.
Designed for application up to a maximum of 50mm and a minimum of 5mm, to provide a sound base. Typically 900m2 of Stopgap 600 at 5mm thickness can be pumped per day. Suitable for both absorbent and non-absorbent subfloors.
|
Stopgap Red Bag Powder Mixed with Water
A water mix self-smoothing underlayment. The powder is a protein free blend of sand, cement and organic polymers. When mixed it is designed to produce a smooth dense surface. Suitable for absorbent subfloors and in areas that are biologically sensitive.
Stopgap Red Bag is designed for areas subject to foot and light wheeled traffic and can be used over normal underfloor heating installations. Application can be to a maximum of 6mm unfilled and a minimum of 3mm and it can be smoothed to a feathered-edge. Suitable for filled mixes for greater thickness using Stopgap Graded Aggregate.
Bag size 25kg = 4.8 square metre coverage at 3mm
|
A solvent free acrylic emulsion adhesive which is designed to give a high bond strength, strong initial tack and a long open time. It is protected against biodegradation and is suitable for use over normal underfloor heating installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Styccobond F41 is a solvent free emulsion adhesive designed to provide a permanently tacky film to prevent loose lay carpet tiles from moving. It allows the tile to be lifted and replaced easily without remedial work. Non-flammable and resistant to plasticiser migration.
The tackifier has an added rust inhibitor element, which prevents the product from causing oxidation when used on raised access flooring or other metallic subfloors.
The tackifier is protected against biodegradation and is suitable for use over underfloor heating installations.
Coverage is 7 Square Metres per Litre, therefore 35 square metres per tub
|
Styccobond F48 is a solvent free co-polymer emulsion adhesive having particularly high resistance to both heat and PVC plasticisers making it particularly suitable for use in conservatories and areas where floor to ceiling windows are installed. It is protected against bio-degradation and is suitable for use over normal underfloor heating installations.
STYCCOBOND F48 can be used for securing a wide range of plasticised PVC floorcoverings in both sheet and tile form.
|
Stopgap P131 is a neoprene emulsion primer to promote adhesion of Stopgap smoothing underlayments to both absorbent and non-absorbent surfaces. Designed to prevent rapid drying of adhesives and smoothing underlayments.
Applications:
Absorbent: Concrete, sand/cement screed, plywood, hardwood and chipboard
Non-absorbent: Terrazzo, steel, galvanised steel, waterproof surface membranes, epoxy, polyurethane and existing adhesive residue.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STYCCOBOND F49 HYBRID PS is a temperature tolerant, water-based pressure sensitive adhesive for bonding vinyl floorcoverings. It is designed for use in conservatories, areas where floor to ceiling windows are installed and other areas where floorcoverings have to be tolerant of extreme temperature variations. It gives a strong initial tack and high bond strength.
|
Styccobond F60 Contact Adhesive
A solution of synthetic rubber and resin in flammable solvent. Primarily used to secure PVC and rubber coving and skirting. The adhesive is applied to both surfaces by spreader or brush and combines quick drying with a 30 minute open time. It is suitable for use over normal underfloor heating installations and will withstand normal wet cleaning techniques. The formation of an 'instant bond' makes it particularly suitable for securing floorcoverings and specific wallcoverings vertically on stairs and walls.
5 Litre tub as a coverage of 10m2.
|
Acrylic emulsion adhesive designed to give a high bond strength and high initial tack. Suitable for installation over normal underfloor heating installations.
Tub will cover 15m2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
StyccoBond F46 Pressure Sensitive for Vinyl Floorcoverings.
is a solvent free acrylic polymer emulsion adhesive that dries to a permanent tacky film. It is used to reduce the incidence of trowel serrations shadowing through thin vinyl flooring and is designed to give strong initial tack and a
high bond strength. It is protected against biodegradation and is suitable for use over normal underfloor heating installations.
STYCCOBOND F46 can be used for securing a wide range of sheet and tile floorcovering.
Features
True Pressure Sensitive Properties – ideal for design floorcoverings
Excellent Tack
High Bond Strength
Excellent Plasticiser Resistance
Approved for marine use
|
STOPGAP 700 FLEX
Fibre Reinforced Floor Smoothing Underlayment.
STOPGAP 700 is an ultra-fast drying, fibre reinforced self-levelling smoothing
underlayment designed for use on plywood and steel subfloors prior to the installation of new floor coverings.
Stopgap 700 20kg bag - coverage 4.8 square at 3mm thick.
|
A solvent free, low odour adhesive ideal for fixing to vertical as well as horizontal surfaces. Easy to apply by brush or notched spreader, it has a long open time and can be reactivated by heat.
Available in a 5l tub.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STOPGAP FAST-TRACK 30 is a rapid setting and rapid drying, self-levelling smoothing underlayment that incorporates the latest advances in cement technology providing a truly fast track solution. It is suitable for use in light to heavy-duty applications for preparing sound absorbent and non-absorbent subfloors prior to the installation of new floorcoverings.
A 16kg bag of FAST-TRACK 30 mixed with 4.0 litres of clean water will cover
approximately 5.6m² at a thickness of 2mm.
|
A two part adhesive specifically designed to secure a range of sheet floor coverings to the Stopgap Isolator Membrane. Suitable for use in areas that are subject to high levels of moisture. When cured it is resistant to water, oil and grease.
|
One part moisture curing polyurethane adhesive. When cured it is resistant to water, oil and grease. Suitable for use over normal underfloor heating installations. When fully cured, the water resistance makes it ideal for indoor and outdoor installations subjected to surface water.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Styccobond F54 is a non-flammable, synthetic rubber emulsion adhesive for installing linoleum. It is designed to provide a high initial grab. It is protected against bio- degradation and is suitable for use over normal underfloor heating installations. To minimise the effect of adhesive shadowing through the vinyl floorcovering, the adhesive can be trowel applied and flattened with a paint roller. The 'double drop' technique can also be used to reduce the drying time.
|
STYCCOBOND F49 HYBRID PS is a temperature tolerant, water-based pressure sensitive adhesive for bonding vinyl floorcoverings. It is designed for use in conservatories, areas where floor to ceiling windows are installed and other areas where floorcoverings have to be tolerant of extreme temperature variations. It gives a strong initial tack and high bond strength.
|
Spiked Roller.
400mm wide long handled de-airator used for the application of Stopgap Underlayments.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A solvent free acrylic emulsion adhesive which is designed to give a high bond strength, strong initial tack and a long open time. It is protected against biodegradation and is suitable for use over normal underfloor heating installations.
|
StyccoBond F46 Pressure Sensitive for Vinyl Floorcoverings.
is a solvent free acrylic polymer emulsion adhesive that dries to a permanent tacky film. It is used to reduce the incidence of trowel serrations shadowing through thin vinyl flooring and is designed to give strong initial tack and a
high bond strength. It is protected against biodegradation and is suitable for use over normal underfloor heating installations.
STYCCOBOND F46 can be used for securing a wide range of sheet and tile floorcovering.
Features
True Pressure Sensitive Properties – ideal for design floorcoverings
Excellent Tack
High Bond Strength
Excellent Plasticiser Resistance
Approved for marine use
|
STYCCOBOND F73 PLUS is a single pack, fibre-reinforced moisture curing heavy duty flooring adhesive suitable for installing a wide range of floorcoverings and for artificial grass. It is water resistant and suitable for outdoor use. It is resistant to oil and grease and is suitable for use over normal underfloor heating systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Acrylic emulsion adhesive designed to give a high bond strength and high initial tack. Suitable for installation over normal underfloor heating installations.
Tub will cover 45m2
|
Styccobond B95 15kg is a high performance, one part, flexible, moisture curing
polyurethane adhesive used for installing a wide range of wood floorcoverings. It is
non-flammable and is quick setting to develop a high bond strength. It is protected
against bio-degradation and suitable for use over normal underfloor heating.
|
Styccobond Fball F57 is a solvent free, carbon fibre filled acrylic conductive adhesive that is designed to give a high bond strength, with a strong initial tack and long open time. Has good plasticiser resistance and is also protected against biodegradation. It is suitable for application over normal underfloor heating installations.
|
|
|
