|
|
|
|
|
|
|
|
|
|
|
Get Stuck In adhesive is a multi purpose contact adhesive supplied in a 500ml aerosol can.
Clean - Every application is a fresh clean application. No product is wasted. The enclosed system prevents the product drying out, skinning over or becoming contaminated.
Non flammable adhesive - The only flammable component is the propellant. Once that has evaporated, a totally non flammable bond is achieved.
Health and safety - Easily disposable - contains low odour and no CFC's.
Storage - Can be stored for 12months when kept in the original unopened container.
|
Dispersion adhesive for PVC/CV floor coverings, lino and all common textile floor coverings in interior locations. wet adhesive with high initial grab and strong thread-formation allowing fast work progress short open time, time-saving
|
StyccoBond F46 Pressure Sensitive for Vinyl Floorcoverings.
is a solvent free acrylic polymer emulsion adhesive that dries to a permanent tacky film. It is used to reduce the incidence of trowel serrations shadowing through thin vinyl flooring and is designed to give strong initial tack and a high bond strength. It is protected against biodegradation and is suitable for use over normal underfloor heating installations. STYCCOBOND F46 can be used for securing a wide range of sheet and tile floorcovering.
Features True Pressure Sensitive Properties – ideal for design floorcoverings Excellent Tack High Bond Strength Excellent Plasticiser Resistance Approved for marine use
|
|
|
|
|
|
|
|
|
|
|
|
|
Polyflor have launched a Home Floor Care Kit, which is designed to offer a complete cleaning solution for luxury vinyl flooring installed in the home.
The Floor Care Kit includes: - Daily Cleanse 750ml - Prepare 750ml - Polish & Protect 750ml - Coarse Stripper - Blue Applicator, - Polishing Pad, - Floor protector Furniture Pads - Floor Care Guide
|
- for use with all common textile, lino and PVC coverings, therefore economical in use
|
Conductive fibre-adhesive for textile and linoleum coverings - rapid grab properties, efficient installation, saves time
- snap-off 28 cm / 21 cm trowel blade supplied, option for large or small areas
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexible epoxy resin adhesive for heavy duty floor coverings in interior, exterior and wet locations problem-solver in many applications
|
StyccoBond F46 Pressure Sensitive for Vinyl Floorcoverings.
is a solvent free acrylic polymer emulsion adhesive that dries to a permanent tacky film. It is used to reduce the incidence of trowel serrations shadowing through thin vinyl flooring and is designed to give strong initial tack and a high bond strength. It is protected against biodegradation and is suitable for use over normal underfloor heating installations. STYCCOBOND F46 can be used for securing a wide range of sheet and tile floorcovering.
Features
True Pressure Sensitive Properties – ideal for design floorcoverings Excellent Tack High Bond Strength Excellent Plasticiser Resistance Approved for marine use
|
Flexible polyurethane adhesive for heavy-duty floor coverings - very high dimensional stability even with special covering materials
- highest bond-strength, therefore extremely reliable
- for (almost) any loading, therefore universal applications
|
|
|
|
|
|
|
|
|
|
|
|
|
Tremco SF108 Pressure Sensitive Acrylic Adhesive
Tremco SF108 (formerly Treadfast 108) is a pressure sensitive adhesive for vinyl floor and wall coverings and for most rubber floor coverings. Benefits: *Guaranteed no serration marks *Can be applied direct to clean impervious surfaces *Solvent free, low toxicity and non-flammable *Thermo-welding same day with dry bond method *Cleaner and safer than traditional rubber adhesives * dry bonding option for PVC floor coverings direct to Tremco damp proof membranes.
Tremco SF108 Pressure Sensitive Acrylic Adhesive is used for: bonding PVC floor, wall and ceiling coverings single stick bonding of rubber flooring, tiles and sheet to porous surfaces.
Amazing coverage of over 100 square meters per 15L unit.
15L Unit
|
Styccobond Fball F57 is a solvent free, carbon fibre filled acrylic conductive adhesive that is designed to give a high bond strength, with a strong initial tack and long open time. Has good plasticiser resistance and is also protected against biodegradation. It is suitable for application over normal underfloor heating installations.
|
Get Stuck In adhesive is a multi purpose contact adhesive supplied in a 17kg pressurised Container. Simply Connect a 4 metre hose and spray gun to provide a portable, easy to use and time saving spray-able Adhesive system.
Portable - no need for a compressor or other expensive equipment.
Clean - Every application is a fresh clean application. No product is wasted. The enclosed system prevents the product drying out, skinning over or becoming contaminated.
Non flammable adhesive - The only flammable component is the propellant. Once that has evaporated, a totally non flammable bond is achieved.
Health and safety - Easily disposable - contains low odour and no CFC's.
Storage - Can be stored for 12months when kept in the original unopened container.
|
|