|
|
|
|
|
|
|
|
|
|
|
CFS Spray Adhesive for use with CFS Carpet Tiles.
|
StyccoBond F3 is a water based rubber/resin flooring adhesive that has excellent wet grab with an early build up of strength. It is protected against bio-degradation and is suitable for use over normal underfloor heating installations.
1 Litre tub as a coverage of 3 SQM
|
Get Stuck In adhesive is a multi purpose contact adhesive supplied in a 500ml aerosol can.
Clean - Every application is a fresh clean application. No product is wasted. The enclosed system prevents the product drying out, skinning over or becoming contaminated.
Non flammable adhesive - The only flammable component is the propellant. Once that has evaporated, a totally non flammable bond is achieved.
Health and safety - Easily disposable - contains low odour and no CFC's.
Storage - Can be stored for 12months when kept in the original unopened container.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dispersion adhesive for PVC/CV floor coverings, lino and all common textile floor coverings in interior locations. wet adhesive with high initial grab and strong thread-formation allowing fast work progress short open time, time-saving
|
Styccobond F41 is a solvent free emulsion adhesive designed to provide a permanently tacky film to prevent loose lay carpet tiles from moving. It allows the tile to be lifted and replaced easily without remedial work. Non-flammable and resistant to plasticiser migration.
The tackifier has an added rust inhibitor element, which prevents the product from causing oxidation when used on raised access flooring or other metallic subfloors.
The tackifier is protected against biodegradation and is suitable for use over underfloor heating installations.
Coverage is 7 Square Metres per Litre, therefore 35 square metres per tub.
|
Dispersion adhesive with strong thread formation, excellent grab and high final strength - for almost all textile coverings
- strong thread-formation, giving reliable adhesion
|
|
|
|
|
|
|
|
|
|
|
|
|
Laybond Carpet Adhesive is an carpet flooring adhesive which is an all purpose adhesive for permanent bonding to vinyl, PVC and carpets.
|
Universal adhesive for all resilient and textile floor coverings - for almost all textile coverings, therefore truly universal
- strong thread-formation, giving reliable adhesion
- best possible environmental compatibility due to its EC 1 classification
|
- for use with all common textile, lino and PVC coverings, therefore economical in use
|
|
|
|
|
|
|
|
|
|
|
|
|
Tremco SF110 Carpet Adhesive
Tremco SF110 (formerly Treadfast ST 110) is a very low VOC, solvent free, water-based, synthetic latex (SBR) multi-purpose adhesive.
Benefits: * Very low VOC levels - tested to EC1 requirements * Suitable for bonding a wide range of carpets and vinyl * Water-based, solvent-free * Non-flammable * Clean to use, non-staining
Tremco SF110 Carpet Adhesive is suitable for hessian, ActionBac®, felt, rubber gel, & latex backed carpets, non-plasticized vinyl floor coverings & cushioned vinyl.
15 L Tub
|
Dispersion adhesive for PVC/CV floor coverings, lino and all common textile floor coverings in interior locations. - wet adhesive with high initial grab and strong thread-formation allowing fast work progress
- short open time, time-saving
|
Conductive fibre-adhesive for textile and linoleum coverings - rapid grab properties, efficient installation, saves time
- snap-off 28 cm / 21 cm trowel blade supplied, option for large or small areas
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexible epoxy resin adhesive for heavy duty floor coverings in interior, exterior and wet locations problem-solver in many applications
|
Flexible polyurethane adhesive for heavy-duty floor coverings - very high dimensional stability even with special covering materials
- highest bond-strength, therefore extremely reliable
- for (almost) any loading, therefore universal applications
|
Styccobond F41 is a solvent free emulsion adhesive designed to provide a permanently tacky film to prevent loose lay carpet tiles from moving. It allows the tile to be lifted and replaced easily without remedial work. Non-flammable and resistant to plasticiser migration. The tackifier has an added rust inhibitor element, which prevents the product from causing oxidation when used on raised access flooring or other metallic subfloors. The tackifier is protected against biodegradation and is suitable for use over underfloor heating installations.
25 Litre Tub as a coverage of 7 -20 m2
|
|
|
|
|
|
|
|
|
Get Stuck In adhesive is a multi purpose contact adhesive supplied in a 17kg pressurised Container. Simply Connect a 4 metre hose and spray gun to provide a portable, easy to use and time saving spray-able Adhesive system.
Portable - no need for a compressor or other expensive equipment.
Clean - Every application is a fresh clean application. No product is wasted. The enclosed system prevents the product drying out, skinning over or becoming contaminated.
Non flammable adhesive - The only flammable component is the propellant. Once that has evaporated, a totally non flammable bond is achieved.
Health and safety - Easily disposable - contains low odour and no CFC's.
Storage - Can be stored for 12months when kept in the original unopened container.
|
|